How Much Do Plumbers Charge For a Toilet Installation?
Are you wondering how much do plumbers charge for installing a toilet? If yes, here’s what you need to know before hiring a plumber.
COMPARE QUOTESFrom replacing windows to installing new toilets and even some roof work, the reason for this boom in home improvement is aging homes. Nearly 40 percent of all the houses in the United States are more than 50 years old, and homeowners are sprucing up their bathrooms as part of bringing their homes up to code.
Replacing a toilet can involve several moving parts, such as turning off the main supply line, replacing the bowl, and other toilet parts. Due to this involved process, many homeowners end up hiring a plumber to carry out the installation of a new toilet. But how much do plumbers charge for their service? Let’s find out in this comprehensive guide.
How Much Does it Cost to Install a Toilet?
The typical toilet installation cost by a professional will run you between $275 and $459. Note that these prices do not factor in how much the toilet itself will cost. As a homeowner, you will be in charge of supplying it.
The cost of the toilet will vary with each model’s features and the kind of material used to produce it. A basic toilet will cost you less than a smart one, one with concealed trap ways, or even a pressure-assisted one.
COMPARE QUOTESLabor Cost for Toilet Installation
In general, the cost of labor for a plumber to install a toilet is going to run about $250, give or take $100. The labor cost for toilet installation can vary depending on several factors:
- Region: Rates can vary widely by location. Urban areas or regions with a high cost of living might have higher plumber rates than rural areas.
- Complexity of the Job: If the installation involves more than just replacing an old toilet with a new one (for example, moving plumbing lines or installing a new flange), it will likely be more expensive.
- Type of Toilet: Some high-end toilets or those with complex features might require more time or expertise to install.
- Existing Conditions: If there’s damage or if old parts are difficult to remove, this can add to the labor time and cost.
- Plumber’s Experience: A more experienced plumber might charge more than someone just starting out.
That said, the typical labor cost for a standard toilet installation in the U.S. ranged from $180 to $300, but it can go higher based on the factors mentioned above. This is just the labor cost; it doesn’t include the price of the toilet or any additional parts or fixtures.
For the most accurate estimate, it’s best to get multiple quotes from local plumbers or plumbing companies. They can provide a more precise figure based on your specific situation and current local rates.
Tips to Save Money on Labor Costs
- Do your research: Get multiple quotes from different professionals to ensure you’re getting a fair price for the job. Be sure to compare their experience, reputation, and customer reviews.
- Bundle projects: If you have other plumbing or bathroom renovation projects planned, consider bundling them together. You may be able to negotiate a lower labor cost if the plumber or contractor is working on multiple tasks at once.
- Schedule during off-peak times: Try to schedule your toilet installation during a less busy time for the plumber or contractor, such as during the winter months or weekdays. They may be more willing to offer a lower rate during these slower periods.
- DIY: If you have plumbing experience or are comfortable with basic home repairs, consider installing the toilet yourself. This can save you a significant amount of money on labor costs. However, if you’re unsure about your abilities or the complexity of the project, it’s best to hire a professional to ensure a proper installation.
Understanding the labor cost for toilet installation is crucial for homeowners looking to upgrade their bathrooms. With the average cost ranging from $100 to $300, it’s essential to consider factors such as location, complexity, type of toilet, and the professional’s experience when estimating the cost. By researching, bundling projects, scheduling during off-peak times, or even doing it yourself, you can save money on labor costs and enjoy a new, efficient, and stylish toilet in your bathroom.
COMPARE QUOTESThe Most Popular Types of Toilet Bowl Shapes
When it comes to toilet bowls, two designs dominate the market. These are elongated and round toilet bowls.
Round toilet bowls have existed in the market as far back as when toilets were first introduced. On the other hand, elongated toilet bowls, are a relatively recent design addition to the market. While each of these two designs will serve the primary function just fine, there are some differences you will have to consider when shopping for a toilet.
1. The Appearance
The most obvious difference is in their appearance. A round toilet bowl is circular, and therefore it will extend less into the room.
An elongated one leans toward the oval shape. Thus, it ends up taking up more space.
2. Comfort
When it comes to how comfortable each of them feels when you use them, the elongated bowl tends to have a slight advantage. That’s because its bigger shape can accommodate you more than the round bowl.
3. Ease of Maintenance
The maintenance of a toilet bowl is a necessary consideration when you want to install a toilet. In this regard, an elongated toilet bowl has a better advantage than a round-shaped one.
That’s because the elongated bowl (in some brands) sports a smaller crevice around its underside. Consequently, it is easier for you to use a brush when cleaning it compared to the round bowl.
4. Cost
The elongated toilet bowl typically costs more than a rounded one.
Types and Costs of Toilet Flush Systems
The type of flush system toilet does considerably influence the toilet you finally end up selecting. Each flush system has its strength and, therefore, the best way to apply it. Some of these systems include:
1. Dual Flush System
Do you want to save water? A dual flush system uses a standard flush for solid waste matter but a water-saving flush for liquids.
Average Cost: $251 – $330
2. Rear Flush System
Rear flush toilets compact. With a rear flush toilet, the pressure is much higher due to pressure-assisted devices that add more power to each flush.
Average Cost: $380 – $389
3. Gravity Flush System
As the name suggests, this kind of flush toilet depends on gravity to pull the waste down the pipes and requires a lot of water as well.
Average Cost: $175-$402
4. Double Cyclone Flush System
A double cyclone flush toilet uses two nozzles backed by a propulsion system that allows more water to circulate in a cyclone motion.
Average Cost: $530 – $530
5. Pressure-Assisted Flush System
A pressure-assisted toilet will use pressurized air to push water into the bowl. As a result, it is a powerful system that’s suitable for large bowls.
Average Cost: $290 – $301
6. Vacuum-Assisted Flush System
True to the name, this kind of flush system will push air into the vent pipe before it opens for waste. The air will then create a vacuum that pulls the waste through.
Average Cost: $448 – $562
7. Tank Fill Valve System
A tank fill valve flush system uses a floating ball attached to a floating rod to fill the tank. The rod is the one that activates the plunger on the floating ball to either allow or stop water from flowing into the tank.
Average Cost: $100 – $288
8. Flapper-Flush Valve System
With this system, a flapper opens or closes by way of a plate hinged at one side. The flapper connects to a chain that will allow and stop the water from flowing into the tank.
Average Cost: $133 – $141
COMPARE QUOTESTop 5 Toilet Brands
Are you are shopping around for a new toilet? It’s essential that you know which are the highest-rated brands to focus on. Here is a look at the top-five rated toilets to help you make a decision.
1. Kohler Wellworth K-3998-0
The K-3998-0 is an affordable toilet if you are an average homeowner. It is a dual-flush model that comes in 1.6 gallons per flush or 1.1 gallons per flush. The Wellworth K-3998-0 maintains the classic handle, which is useful if you want to install it where guests will use it.
2. American Standard
The American Standard toilet has a siphon flush system that enables it to use less water. If you are on a budget, the American Standard’s water efficiency, coupled with the classic style, will appeal to you. The toilet is also easy to install though you will need to buy the seat separately.
3. Toto Drake II Elongated
Is accessibility a concern? Then the Toto Drake II is a good option due to its modern seat height. It is relatively quiet and friendly to your pocket. The Toto Drake II is also efficient, flushing at an impressive 1.28 gallons per flush.
4. Saniflo 023 Self-Contained
When you need a toilet for a small bathroom or apartment, then the Saniflo 023 should be on your radar. You can connect it to a sink, and the vertical pumping system will deliver enough power to clean it.
5. Swiss Madison Ivy
The Swiss Madison Ivy is an elongated toilet that keeps the flushing noise to a minimum. It has a design that makes it easy to maintain and clean. Since the Swiss Madison Ivy toilet features a groove-less design, it’s ideal for modern bathrooms or smaller spaces.
The Cost of Adding a New Toilet
When you plan to add another toilet to your home, you should be aware that legally speaking, you have to hire a professional. If you are not the first owner of the house, you can consult the previous owners and get the original plans for anywhere between $40 and $200
Adding a new toilet can take anywhere between three to seven days, depending on the location. The average material cost is below $650 for a toilet and a cold water basin. The labor charge for an additional toilet should be in the $180 range.
How Much Do Plumbers Charge for Labor to Install a New Toilet?
A plumber’s labor charge will vary depending on how sophisticated the new toilet is and how long the installation will take. If there aren’t any significant issues, expect to pay a spend $122 for a new installation.
If you are replacing an old toilet, the plumber will charge you anywhere between $30 and $50 to remove the old unit. Should the plumber run into unexpected issues that can prolong the job or call for extra work, expect to pay between $75 and $122 per hour for labor.
Examples of Toilets and Current Prices
Delta: Foundations 2-piece 1.28 GPF Single Flush Elongated Toilet in White
Cost: $159
American Standard: Tofino Complete 1-Piece 1.1 GPF Dual Flush Elongated Toilet in White with Slow Close Seat
Cost: $339
KOHLER: Cimarron Revolution 360 Complete Solution 2-piece 1.28 GPF Single Flush Elongated Toilet in White, with Slow-Close Seat
Cost: $299
Get the Best Plumber to Install Your Toilet
The home improvement market is experiencing an upsurge due to many homes aging and in need of urgent upgrades. Installing new toilets is a part of this home improvement regime, and homeowners rely on plumbers to get the job done. It’s critical to answer the question, “how much do plumbers charge?” for you to get the best value for your money.
5Estimates.com is a friend to homeowners across the nation who need to find the best quotes for their home improvement needs. Talk to us today for valuable home improvement advice and access to reputable contractors to keep your home in good shape.
COMPARE QUOTESToilet installation is a crucial and often overlooked aspect of any home improvement project. As such, it is important to consider the cost associated with installing a toilet when planning any renovations or remodeling projects. The cost of a toilet installation will vary depending on the type of toilet chosen, the area where it’s being installed, and the complexity of the installation itself. Generally speaking, the cost of toilet installation can range anywhere from a few hundred dollars to several thousand depending on the scope of the project.
Budgeting Tips
When budgeting for a toilet installation, it is important to factor in not only the purchase price of the toilet itself but also any additional materials and labor costs associated with its installation. This will include any pipes, fittings, and other components necessary for the toilet to function correctly. Additionally, labor costs may include a plumber’s fee as well as any additional services such as sealing or caulking around the toilet. Here are some important budgeting tips:
• Consider the type of toilet being installed and its cost.
• Factor in any additional materials and labor needed for installation.
• Work with a professional plumber to get an accurate estimate of the total cost.
• Take into account all components associated with toilet installation.
• Set aside extra funds for any unexpected surprises that may arise.
• Research different toilet styles and designs to find the best option for your bathroom.
• Consider the installation location and any special requirements or challenges that may arise due to its position.
In order to get an accurate estimate of the cost associated with installing a new toilet, it is important to consult with a professional plumber. They will be able to provide you with an accurate estimate of the total cost of the project based on their experience and knowledge of the specific installation requirements. Taking into account all components associated with toilet installation will help ensure that your bathroom remodeling project stays within budget and helps avoid any unexpected surprises during the process.
Toilet Installation: Choosing the Right Toilet for Your Bathroom
Toilet installation may seem like a straightforward process, but choosing the right toilet for your bathroom is crucial to ensure optimal performance and efficiency. With so many options available on the market, it can be overwhelming to decide which one to choose. Here are some factors to consider when selecting a toilet for your bathroom.
-
Size and Shape
Toilets come in a variety of sizes and shapes, and it’s essential to choose one that fits well in your bathroom. Measure the distance from the wall to the floor bolts to ensure you choose a toilet that fits correctly. Additionally, consider the shape of the toilet bowl, as it can affect comfort and ease of use. Round bowls are typically more compact, while elongated bowls provide additional seating space.
-
Flushing Mechanism
The flushing mechanism is one of the most critical features of a toilet, as it affects water usage and efficiency. Older toilets typically use more water per flush than newer models, which can impact your water bill. Choose a toilet with a high-efficiency flushing system that uses less water per flush while still providing adequate flushing power.
-
Height
Toilets come in different heights, and it’s essential to choose one that is comfortable for all users. Standard toilets are typically between 14 and 15 inches tall, while comfort-height toilets are taller, usually between 16 and 19 inches. Consider the needs of your household, such as elderly or disabled individuals, when choosing the height of your toilet.
-
Style
Toilets come in various styles, from traditional to contemporary, and it’s essential to choose one that matches the décor of your bathroom. Consider the color and finish of the toilet, as well as any additional features such as soft-close seats or bidet attachments.
-
Price
Toilets come at a range of price points, and it’s essential to choose one that fits your budget while still meeting your needs. Consider the long-term cost savings of a high-efficiency toilet, which can offset the initial cost.
In conclusion, choosing the right toilet for your bathroom involves considering the size and shape, flushing mechanism, height, style, and price. By taking these factors into account, you can ensure that your toilet installation meets your needs and provides optimal performance and efficiency for years to come.
COMPARE QUOTES
I just found a plumber to install/replace my toilet for $225. Seems a bit high since I’m providing the toilet (American Standard). Is my skepticism fair? 2nd I agree with Kelly before me… I would NEVER hire a plumber to install a toilet for $600 – $800! You’ve got to be kidding me… Are those toilets made of gold?!?
No way can I or no plumber can compete with these prices.
First off in my area most customers don’t buy there toilets, they expect the plumber to supply it and you don’t mention anything about the toilet flange. In most cases there is rust or broken components on the flange or the floor ma be rotten under the toilet. This in most cases can add several hours of time not including driving back to the plumbing store or home store for more materials. If in a perfect world with best case scenario where the old toilet taken out, no repairs or changes and install new toilet, the cost would have to be at min.$ 289 plus cost of the toilet,wax seal, supply line and maybe silicone. Total estimate 600 to 800 for low to mid grade cost toilet. Hire end toilets can cost 400 to 2000 alone.
I can install a toilet in less than 2 hours and I am not a plumber. This post said the cost is between $122 and $228. Note: That was ONLY referring to install costs. So, you don’t think any plumber would install a toilet at a rate of $114 per hour? I think I’d stay away from your company if you say no plumber could do it. I would never call someone to install a toilet if they quoted me 600 – 800.
Where the **** do you get your pricing from? There’s no way in **** a legitimate plumbing company will be able to charge the prices you quoted and remain in business with happy employees. The prices you have given are prices people would pay a handyman to botch the install and cause additional repair cost. (edited for language)
How much to install the American Standard toilet
Need to know how much would a local plumber charge to replace a bathroom toilet ? Tampa Fl
Thanks for explaining that toilets with elongated bowls will feel slightly more comfortable to use. My husband and I have talked about getting new toilets installed in both of our home’s bathrooms to save water. I’m glad I read your article and got a better idea of what types of toilets we’ll be able to choose from!
I need to have a new toilet installed, but I’m not sure how to go about it. It makes sense that I would want to find a professional plumber to help me out on it! It’s good to know average prices, but I’ll have to look into actual plumbers and see how much they charge. That way, I can ensure that I can afford the installation.
I have a dual flush toilet? Keeps on flushing periodically when not in use.
Hi , just replace a new floppy stopper inside of the toilet tank , part cost around $5-$7you can replace by yourself
just paid $780.00 for a Western toilet replacement. Am not 100% satisfied. What to do?
Where are you located.have you found someone to install toilet?