How Much Does a Plumber Cost in Temple, TX

Temple, TX, offers a range of costs for plumbing services that cater to varying needs and complexities. On average, plumbers in Temple charge approximately $60 to $100 per hour for their services. This rate covers standard tasks such as repairing leaks or clearing drains, while more specialized services like water heater installations or sewer line replacements may command higher rates, possibly up to $150 per hour. Additional expenses such as parts and materials depend on the scope of the project; routine jobs may only require basic components, whereas larger undertakings necessitate more expensive materials and equipment. Homeowners in Temple should budget between $200 to $800 for typical plumbing services, encompassing labor, materials, and any necessary permits or inspections required by local regulations.

Buy Smarter - Spend Less Branded


Average Plumber Costs by Service Type in Temple, TX

Below is a list of common plumbing services and the average cost to have a professional plumber in Temple, TX to complete the job.

How Much Does Temple Plumbers Cost to Have a Plumber Install a Sink?

In Temple, TX, the cost of having a plumber install a sink varies based on several factors. On average, homeowners can expect to pay between $200 to $500 for sink installation services. This estimate includes average hourly rates ranging from $60 to $100, influenced by factors such as the type of sink (e.g., pedestal, undermount, or vanity), complexity of the installation, and accessibility to existing plumbing lines. Additional tasks like installing new faucets or drains can also impact costs. It is advisable for homeowners to obtain multiple quotes from reputable plumbers in Temple to ensure competitive pricing and a thorough understanding of the installation requirements specific to their sink project.


How Much Does a Plumber Cost to Snake a Drain?

The cost of having a plumber snake a drain can vary, but on average, homeowners can expect to pay between $110 and $250. This cost depends on factors such as the severity of the clog, the location of the drain, and the length of time required to clear it. Additional factors like after-hours service or emergency calls can increase the price. Prices may also vary based on the plumber’s rates and geographic location. For more severe blockages or those located deep within the plumbing system, costs can be higher due to the increased complexity and time required for the job.


How Much Do Plumbers Charge to Fix a Pipe in Temple, TX?

Professional pipe repair costs in Temple typically range from $100 to $300, depending on factors such as the pipe’s location, extent of damage, and type of material (e.g., PVC, copper, or galvanized steel). Hourly rates for plumbers in Temple generally fall between $60 to $100. Additional factors influencing costs include the complexity of accessing hidden pipes, the need for specialized equipment, and any necessary repairs to water damage resulting from the pipe issue. Homeowners should consult with local plumbers to obtain accurate estimates tailored to their specific pipe repair needs in Temple.


How Much Does it Cost to Reroute Plumbing?

The cost to reroute plumbing varies widely, typically ranging from $700 to $1,500 or more, depending on several factors. The complexity of the project is a key determinant; this includes the length of pipes to be rerouted, the accessibility of the existing plumbing, and the type of materials used. Additional costs may arise if walls, floors, or ceilings need to be opened and later repaired. The cost can also vary based on the plumber’s rates, which are influenced by geographic location and their expertise. Larger projects, such as rerouting plumbing for a whole house, can significantly exceed these estimates.


How Much Does it Cost to Install a New Water Heater?

The cost of installing a new water heater varies, typically ranging from $800 to $1,900. This price can fluctuate based on the type of water heater (e.g., tankless, gas, electric), its capacity, brand, and the complexity of the installation. Factors influencing the cost include the need for any plumbing or electrical modifications, the heater’s energy efficiency, and local labor rates. High-efficiency models or tankless water heaters generally cost more upfront but can offer long-term savings in energy costs. Additional expenses may include removing the old unit and any necessary permits, depending on local regulations.


How Much Do Temple Plumbers Charge to Install a New Toilet?

When considering the cost of plumbers installing a new toilet in Temple, TX, homeowners can anticipate spending between $300 to $800 on average. This price range accounts for factors such as the type of toilet (e.g., standard, high-efficiency, or bidet-equipped), complexity of installation, and the plumber’s hourly rates, typically ranging from $60 to $100. High-end toilets requiring specialized installation techniques or significant plumbing modifications can increase overall costs. Regional economic factors in Temple influence labor rates, impacting installation expenses. It is essential for homeowners to clarify if removal and disposal of the old toilet are included in the quoted price and to obtain multiple estimates to ensure competitive pricing aligned with their installation needs.


How Much Does it Cost to Have Bathtub or Shower Installed?

The cost to install a bathtub or shower varies significantly, typically ranging from $1,400 to $5,500, but it can be higher for premium models or custom installations. Factors influencing the cost include the type of unit (standard tub, jetted tub, walk-in shower, etc.), the complexity of installation, the need for plumbing adjustments, and the quality of materials. Labor costs, which can vary by region and contractor, also significantly impact the total price. Additional expenses may arise from removing an old unit, modifying existing structures, or customizing tile work and fixtures. High-end features like steam systems can further increase costs.


How Much Does it Cost to Have a Tankless Water Heater Installed?

The installation cost of a tankless water heater typically ranges between $1,000 and $3,000. This price varies based on the type of tankless system (gas or electric), the complexity of installation, and any necessary upgrades to gas lines, venting, or electrical systems. Gas models generally require more extensive installation work and are hence more expensive. The overall cost is also influenced by local labor rates and the specific requirements of the installation site. Tankless heaters, while more costly to install than traditional tank models, offer long-term savings in energy efficiency and space conservation.


Resources: Temple, TX – Wikipedia

Find A Temple Plumber Near You

Roto-Rooter Plumbing & Drain Services
902 W Avenue G, Temple, TX 76504, United States

FIX IT! Services
1614 W Ave L, Temple, TX 76504, United States

BSR Plumbing
6814 Lower Troy Rd, Temple, TX 76501, United States

Ready Plumber Temple TX
7450 Honeysuckle, Temple, TX 76502, United States


Map Of Service Area: