How Much Does a Plumber Cost in Spokane Valley, WA

In Spokane Valley, WA, the cost of plumbing services can vary significantly depending on the job’s complexity and the specific plumber hired. On average, plumbers in this area charge between $80 and $150 per hour. This rate can fluctuate based on the plumber’s experience and the nature of the task. Additionally, homeowners should consider the costs of parts and materials, which can add significantly to the total bill. For example, replacing a simple fixture might cost only a few dollars in parts, whereas installing a new water heater could involve several hundred dollars in materials alone. Overall, for comprehensive plumbing services, including labor, materials, and equipment, homeowners in Spokane Valley can expect to spend anywhere from $150 to $800 or more, depending on the project’s scope and requirements.

Buy Smarter - Spend Less Branded


Average Plumber Costs by Service Type in Spokane Valley, WA

Below is a list of common plumbing services and the average cost to have a professional plumber in Spokane Valley, WA to complete the job.

How Much Does Spokane Valley Plumbers Cost to Have a Plumber Install a Sink?

When having a plumber install a sink in Spokane Valley, WA, several factors can influence the total cost. The average hourly rate for plumbers in this area ranges from $80 to $150, with more experienced professionals often commanding higher rates. For a standard sink installation, including basic labor and materials, the cost typically falls between $300 and $600. However, if the installation is more complex—such as adding new plumbing lines, working with luxury sinks, or dealing with difficult installations—the price can easily exceed $1,000. To ensure a fair price, it’s advisable for homeowners to obtain multiple quotes from different plumbers. This approach can help identify a reasonable rate for the service and possibly reveal any outliers in pricing.


How Much Does a Plumber Cost to Snake a Drain?

The cost of having a plumber snake a drain can vary, but on average, homeowners can expect to pay between $110 and $250. This cost depends on factors such as the severity of the clog, the location of the drain, and the length of time required to clear it. Additional factors like after-hours service or emergency calls can increase the price. Prices may also vary based on the plumber’s rates and geographic location. For more severe blockages or those located deep within the plumbing system, costs can be higher due to the increased complexity and time required for the job.


How Much Do Plumbers Charge to Fix a Pipe in Spokane Valley, WA?

Homeowners typically spend between $150 and $450 on professional pipe repair, though costs can vary widely based on several factors. The location of the pipe, the extent of the damage, the type of pipe material, and additional work required, such as accessing hidden pipes or repairing water damage, all play significant roles in the final cost. Plumbers in Spokane Valley generally charge between $80 and $150 per hour, and this fee is added to the cost of parts and materials. For example, repairing a visible, easily accessible pipe may cost less than fixing a pipe within a wall or under the floor, which requires more labor and potentially additional repairs to access the damaged section.


How Much Does it Cost to Reroute Plumbing?

The cost to reroute plumbing varies widely, typically ranging from $700 to $1,500 or more, depending on several factors. The complexity of the project is a key determinant; this includes the length of pipes to be rerouted, the accessibility of the existing plumbing, and the type of materials used. Additional costs may arise if walls, floors, or ceilings need to be opened and later repaired. The cost can also vary based on the plumber’s rates, which are influenced by geographic location and their expertise. Larger projects, such as rerouting plumbing for a whole house, can significantly exceed these estimates.


How Much Does it Cost to Install a New Water Heater?

The cost of installing a new water heater varies, typically ranging from $800 to $1,900. This price can fluctuate based on the type of water heater (e.g., tankless, gas, electric), its capacity, brand, and the complexity of the installation. Factors influencing the cost include the need for any plumbing or electrical modifications, the heater’s energy efficiency, and local labor rates. High-efficiency models or tankless water heaters generally cost more upfront but can offer long-term savings in energy costs. Additional expenses may include removing the old unit and any necessary permits, depending on local regulations.


How Much Do Spokane Valley Plumbers Charge to Install a New Toilet?

In Spokane Valley, WA, the cost for plumbers to install a new toilet can vary based on several factors, including the type of toilet, the complexity of the installation, and the plumber’s rates. Typically, the price range for installing a standard toilet is between $150 and $350. More intricate installations, such as those involving high-end toilets or significant plumbing modifications, can push the cost to $500 or more. The average cost for a straightforward installation generally hovers around $250. Labor costs, influenced by regional economic factors and the plumber’s experience, are a major component of this expense. Additionally, if the service includes the removal and disposal of the old toilet, this might add another $50 to $100 to the total bill.


How Much Does it Cost to Have Bathtub or Shower Installed?

The cost to install a bathtub or shower varies significantly, typically ranging from $1,400 to $5,500, but it can be higher for premium models or custom installations. Factors influencing the cost include the type of unit (standard tub, jetted tub, walk-in shower, etc.), the complexity of installation, the need for plumbing adjustments, and the quality of materials. Labor costs, which can vary by region and contractor, also significantly impact the total price. Additional expenses may arise from removing an old unit, modifying existing structures, or customizing tile work and fixtures. High-end features like steam systems can further increase costs.


How Much Does it Cost to Have a Tankless Water Heater Installed?

The installation cost of a tankless water heater typically ranges between $1,000 and $3,000. This price varies based on the type of tankless system (gas or electric), the complexity of installation, and any necessary upgrades to gas lines, venting, or electrical systems. Gas models generally require more extensive installation work and are hence more expensive. The overall cost is also influenced by local labor rates and the specific requirements of the installation site. Tankless heaters, while more costly to install than traditional tank models, offer long-term savings in energy efficiency and space conservation.


Resources: Spokane Valley, WA – Wikipedia

Find A Spokane Valley Plumber Near You

Mr. Rooter Plumbing of Spokane
16809 E Sprague Ave, Spokane Valley, WA 99037, United States

Raptor Rooter & Plumbing
305 S Dishman Mica Rd, Spokane Valley, WA 99206, United States

Gold Seal Plumbing
5524 E Boone Ave, Spokane Valley, WA 99212, United States

Bulldog Rooter
16124 E Marietta Ave STE 101, Spokane Valley, WA 99216, United States


Map Of Service Area: