How Much Does a Plumber Cost in Kent, WA

In Kent, WA, the cost of plumbing services can vary depending on several factors. On average, plumbers charge between $80 and $120 per hour for their services. However, the total cost can range from $150 to $5000 per hour, inclusive of parts and materials. Additional expenses may include travel time, permits, and equipment rental. For homeowners in Kent, WA, expecting to undertake plumbing services, the total cost can vary widely depending on the complexity of the job. For minor repairs or installations, such as fixing leaks or replacing faucets, homeowners might expect to pay on the lower end of the spectrum. However, more extensive projects like remodeling or repiping may incur higher costs due to labor, materials, and equipment required.

Buy Smarter - Spend Less Branded


Average Plumber Costs by Service Type in Kent, WA

Below is a list of common plumbing services and the average cost to have a professional plumber in Kent, WA to complete the job.

How Much Does Kent Plumbers Cost to Have a Plumber Install a Sink?

When considering the installation of a sink in Kent, WA, homeowners should anticipate costs ranging from $200 to $2000 or more. Factors influencing the price include the type of sink, its size, and the complexity of installation. Plumbers in Kent typically charge between $80 and $120 per hour for their services. It’s crucial for homeowners to obtain multiple quotes to ensure they get a competitive price. Additionally, the cost of materials such as the sink itself, piping, and fittings will contribute to the overall expense. By comparing quotes and carefully considering the factors involved, homeowners can make informed decisions about their sink installation projects in Kent, WA.


How Much Does a Plumber Cost to Snake a Drain?

The cost of having a plumber snake a drain can vary, but on average, homeowners can expect to pay between $110 and $250. This cost depends on factors such as the severity of the clog, the location of the drain, and the length of time required to clear it. Additional factors like after-hours service or emergency calls can increase the price. Prices may also vary based on the plumber’s rates and geographic location. For more severe blockages or those located deep within the plumbing system, costs can be higher due to the increased complexity and time required for the job.


How Much Do Plumbers Charge to Fix a Pipe in Kent, WA?

For residents of Kent, WA, the average cost of hiring a plumber to fix a pipe ranges from $150 to $1000 or more. Factors influencing the cost include the location of the pipe, the extent of damage, and the type of material used. Plumbers typically charge hourly rates between $80 and $120, with additional costs for parts and materials. Repairing pipes buried underground or within walls may require additional labor and equipment, increasing the overall expense. Additionally, addressing water damage resulting from pipe leaks can add to the total cost. Homeowners in Kent should budget accordingly and seek estimates from qualified plumbers to assess the scope and cost of their pipe repair needs.


How Much Does it Cost to Reroute Plumbing?

The cost to reroute plumbing varies widely, typically ranging from $700 to $1,500 or more, depending on several factors. The complexity of the project is a key determinant; this includes the length of pipes to be rerouted, the accessibility of the existing plumbing, and the type of materials used. Additional costs may arise if walls, floors, or ceilings need to be opened and later repaired. The cost can also vary based on the plumber’s rates, which are influenced by geographic location and their expertise. Larger projects, such as rerouting plumbing for a whole house, can significantly exceed these estimates.


How Much Does it Cost to Install a New Water Heater?

The cost of installing a new water heater varies, typically ranging from $800 to $1,900. This price can fluctuate based on the type of water heater (e.g., tankless, gas, electric), its capacity, brand, and the complexity of the installation. Factors influencing the cost include the need for any plumbing or electrical modifications, the heater’s energy efficiency, and local labor rates. High-efficiency models or tankless water heaters generally cost more upfront but can offer long-term savings in energy costs. Additional expenses may include removing the old unit and any necessary permits, depending on local regulations.


How Much Do Kent Plumbers Charge to Install a New Toilet?

Installing a new toilet in Kent, WA, can cost homeowners between $200 and $1500, depending on various factors. The type of toilet, complexity of installation, and plumber’s rates all play a role in determining the overall expense. High-end toilets or those with advanced features may command higher prices, as they often require more intricate installation procedures. Factors such as plumbing modifications or replacing old plumbing fixtures can also impact the cost. Labor costs in Kent are influenced by regional economic factors and the plumber’s experience level. Homeowners should inquire whether the installation price includes the removal and disposal of the old toilet to avoid any surprises in the final bill. By considering these factors, homeowners can budget effectively for their toilet installation projects in Kent, WA.


How Much Does it Cost to Have Bathtub or Shower Installed?

The cost to install a bathtub or shower varies significantly, typically ranging from $1,400 to $5,500, but it can be higher for premium models or custom installations. Factors influencing the cost include the type of unit (standard tub, jetted tub, walk-in shower, etc.), the complexity of installation, the need for plumbing adjustments, and the quality of materials. Labor costs, which can vary by region and contractor, also significantly impact the total price. Additional expenses may arise from removing an old unit, modifying existing structures, or customizing tile work and fixtures. High-end features like steam systems can further increase costs.


How Much Does it Cost to Have a Tankless Water Heater Installed?

The installation cost of a tankless water heater typically ranges between $1,000 and $3,000. This price varies based on the type of tankless system (gas or electric), the complexity of installation, and any necessary upgrades to gas lines, venting, or electrical systems. Gas models generally require more extensive installation work and are hence more expensive. The overall cost is also influenced by local labor rates and the specific requirements of the installation site. Tankless heaters, while more costly to install than traditional tank models, offer long-term savings in energy efficiency and space conservation.


Resources: Kent, WA – Wikipedia

Find A Kent Plumber Near You

Beacon Plumbing, Heating, Electrical & Mechanical Inc
8611 S 192nd St, Kent, WA 98031, United States

Drain Pro Plumbing & Septic
600 Central Ave S, Kent, WA 98032, United States

Roto-Rooter Plumbing & Water Cleanup
25130 74th Ave S, Kent, WA 98032, United States

Pristine Plumbing
11216 SE 223rd St, Kent, WA 98031, United States


Map Of Service Area: