How Much Does a Plumber Cost in Dallas, TX

The cost of plumbing services in Dallas, TX, can vary widely depending on the nature and complexity of the job. On average, homeowners can expect to pay between $75 and $150 per hour for a licensed plumber’s services. The typical hourly rate for most standard plumbing work falls within this range, although more complex or emergency services can push the rate upwards. In addition to the hourly rate, there are often additional costs for parts and materials required for the job. For example, common parts like pipes, fittings, and fixtures can add anywhere from $50 to several hundred dollars to the total bill, depending on the quality and specific needs of the repair or installation.

Buy Smarter - Spend Less Branded

In the Dallas-Fort Worth metropolitan area, the total cost for plumbing services can range significantly based on the scope of work. Simple repairs might cost a homeowner a few hundred dollars. At the same time, more extensive projects, such as repiping a home or installing a new water heater, can easily run into the thousands. Homeowners should also consider potential additional costs for specialized equipment or permits, which may be necessary for certain types of plumbing work. Overall, the total cost for plumbing services in the region, including labor, materials, and equipment, typically ranges from $200 to $2,500, depending on the complexity and requirements of the project.


Average Plumber Costs by Service Type in Dallas, TX

Below are a list of common plumbing services and the average cost to have a professional plumber in Dallas, TX to complete the job.

How Much Does Dallas Plumbers Cost to Have a Plumber Install a Sink?

The cost of having a plumber install a sink in Dallas, TX, can vary significantly based on several factors, including the type of sink, the complexity of the installation, and the condition of the existing plumbing. On average, plumbers in Dallas charge between $75 and $150 per hour. For a standard sink installation, which might involve replacing an old sink with a similar new model, the total cost typically ranges from $200 to $600. This includes labor, basic materials, and minor adjustments to the plumbing. However, for more complex installations, such as installing a sink in a new location, adding additional plumbing lines, or working with high-end or custom sinks, the costs can rise substantially, often ranging from $600 to $1,500 or more.

Factors that can affect the price include the need for additional plumbing work, such as rerouting pipes, removing the old sink, and installing additional fixtures like garbage disposals or water filtration systems. Given these potential variables, homeowners must get multiple quotes from different plumbers to ensure they receive a fair and competitive price. Getting several estimates allows homeowners to compare costs, understand the scope of work involved, and make an informed decision based on both budget and the plumber’s reputation for quality and reliability.


How Much Does a Plumber Cost to Snake a Drain?

The cost of having a plumber snake a drain can vary, but on average, homeowners can expect to pay between $110 and $250. This cost depends on factors such as the severity of the clog, the location of the drain, and the length of time required to clear it. Additional factors like after-hours service or emergency calls can increase the price. Prices may also vary based on the plumber’s rates and geographic location. For more severe blockages or those located deep within the plumbing system, costs can be higher due to the increased complexity and time required for the job.


How Much Do Plumbers Charge to Fix a Pipe in Dallas, TX?

In Dallas, TX, the cost for professional pipe repair can vary widely depending on several factors, with homeowners typically spending between $150 and $600 on average. The total cost can range from as low as $100 for minor repairs to over $1,000 for more extensive work. Several factors influence the price, including the location of the pipe, the extent of the damage, and the type of pipe material. For instance, repairing a pipe located behind a wall or under a floor will likely incur higher costs due to the additional labor required to access the pipe. Similarly, pipes made from materials like copper or PVC can have different repair costs due to the price of the materials and the complexity of the repair process.


How Much Does it Cost to Reroute Plumbing?

The cost to reroute plumbing varies widely, typically ranging from $700 to $1,500 or more, depending on several factors. The complexity of the project is a key determinant; this includes the length of pipes to be rerouted, the accessibility of the existing plumbing, and the type of materials used. Additional costs may arise if walls, floors, or ceilings need to be opened and later repaired. The cost can also vary based on the plumber’s rates, which are influenced by geographic location and their expertise. Larger projects, such as rerouting plumbing for a whole house, can significantly exceed these estimates.


How Much Does it Cost to Install a New Water Heater?

The cost of installing a new water heater varies, typically ranging from $800 to $1,900. This price can fluctuate based on the type of water heater (e.g., tankless, gas, electric), its capacity, brand, and the complexity of the installation. Factors influencing the cost include the need for any plumbing or electrical modifications, the heater’s energy efficiency, and local labor rates. High-efficiency models or tankless water heaters generally cost more upfront but can offer long-term savings in energy costs. Additional expenses may include removing the old unit and any necessary permits, depending on local regulations.


How Much Do Dallas Plumbers Charge to Install a New Toilet?

Installing a new toilet in Dallas, TX, typically costs homeowners between $200 and $500, with the average cost hovering around $350. Several factors influence this price range, including the type of toilet, the complexity of the installation, and the plumber’s rates. Standard toilet installations are generally less expensive, while high-end or specialty toilets, such as those with built-in bidets or advanced flushing mechanisms, can significantly increase the overall cost. Additionally, the complexity of the installation, such as if the existing plumbing needs modifications or if the new toilet requires a different footprint than the old one, can also raise costs.

Plumbers in Dallas usually charge between $75 and $150 per hour, with the total labor cost affected by regional economic factors and the plumber’s level of experience. More experienced plumbers or those from well-established companies may charge higher rates but often provide a guarantee of quality work. The cost for toilet installation typically includes the removal and disposal of the old toilet, ensuring homeowners don’t have to handle these tasks themselves. However, it’s always advisable to confirm this with the plumber beforehand. Homeowners should obtain multiple quotes to compare prices and services, ensuring they receive the best value for their investment.


How Much Does it Cost to Have Bathtub or Shower Installed?

The cost to install a bathtub or shower varies significantly, typically ranging from $1,400 to $5,500, but it can be higher for premium models or custom installations. Factors influencing the cost include the type of unit (standard tub, jetted tub, walk-in shower, etc.), the complexity of installation, the need for plumbing adjustments, and the quality of materials. Labor costs, which can vary by region and contractor, also significantly impact the total price. Additional expenses may arise from removing an old unit, modifying existing structures, or customizing tile work and fixtures. High-end features like steam systems can further increase costs.


How Much Does it Cost to Have a Tankless Water Heater Installed?

The installation cost of a tankless water heater typically ranges between $1,000 and $3,000. This price varies based on the type of tankless system (gas or electric), the complexity of installation, and any necessary upgrades to gas lines, venting, or electrical systems. Gas models generally require more extensive installation work and are hence more expensive. The overall cost is also influenced by local labor rates and the specific requirements of the installation site. Tankless heaters, while more costly to install than traditional tank models, offer long-term savings in energy efficiency and space conservation.


Resources: Dallas, TX – Wikipedia

Find A Dallas Plumber Near You

Metro Flow Plumbing
3730 Dilido Rd #422, Dallas, TX 75228

Public Service Plumbers
5610 Dyer St, Dallas, TX 75206

Roto-Rooter Plumbing & Water Cleanup
1412 Main St Ste 620, Dallas, TX 75202

Pure Plumbing
6060 N Central Expy Suite 500, Dallas, TX 75206


Map Of Service Area: