How Much Does a Plumber Cost in Providence, RI

In Providence, RI, plumbing services generally cost around $90 per hour, with typical rates ranging from $75 to $110 per hour, depending on the plumber’s experience and the complexity of the job. Besides the hourly rate, homeowners should also consider the cost of parts and materials, which can add another $30 to $200 to the total bill, depending on the project’s specific requirements. For example, a minor repair such as fixing a leaking faucet might cost approximately $160 in total, while more substantial projects like installing a new water heater could range from $950 to $1,900. Taking into account labor, materials, and necessary equipment, homeowners in Providence can expect to pay between $160 and $1,900 for plumbing services.

Buy Smarter - Spend Less Branded


Average Plumber Costs by Service Type in Providence, RI

Below is a list of common plumbing services and the average cost to have a professional plumber in Providence, RI to complete the job.

How Much Does Providence Plumbers Cost to Have a Plumber Install a Sink?

For homeowners looking to install a sink in Providence, RI, several factors will affect the overall cost. Plumbers in this area typically charge between $75 and $110 per hour, with the total cost for installing a standard sink generally ranging from $260 to $650. More complex installations, which might involve additional plumbing modifications or the installation of high-end fixtures, can cost between $650 and $1,300. It is crucial for homeowners to obtain multiple quotes to ensure they are receiving a fair price, as costs can vary significantly between different plumbing contractors. Factors influencing the final cost include the type of sink being installed, the materials required, and the overall complexity of the job.


How Much Does a Plumber Cost to Snake a Drain?

The cost of having a plumber snake a drain can vary, but on average, homeowners can expect to pay between $110 and $250. This cost depends on factors such as the severity of the clog, the location of the drain, and the length of time required to clear it. Additional factors like after-hours service or emergency calls can increase the price. Prices may also vary based on the plumber’s rates and geographic location. For more severe blockages or those located deep within the plumbing system, costs can be higher due to the increased complexity and time required for the job.


How Much Do Plumbers Charge to Fix a Pipe in Providence, RI?

Homeowners in Providence, RI, can expect to pay between $210 and $420 to fix a pipe, with the average cost typically around $315. The exact cost can vary based on several factors, including the pipe’s location, the extent of the damage, and the type of pipe material. For example, repairing a pipe that is easily accessible might be on the lower end of the scale, whereas a pipe located behind walls or under floors can significantly increase labor costs, which range from $75 to $110 per hour. Additionally, if the repair involves fixing water damage to surrounding areas, the costs can rise further. The parts and materials needed for the repair, such as new piping or connectors, also contribute to the overall expense.


How Much Does it Cost to Reroute Plumbing?

The cost to reroute plumbing varies widely, typically ranging from $700 to $1,500 or more, depending on several factors. The complexity of the project is a key determinant; this includes the length of pipes to be rerouted, the accessibility of the existing plumbing, and the type of materials used. Additional costs may arise if walls, floors, or ceilings need to be opened and later repaired. The cost can also vary based on the plumber’s rates, which are influenced by geographic location and their expertise. Larger projects, such as rerouting plumbing for a whole house, can significantly exceed these estimates.


How Much Does it Cost to Install a New Water Heater?

The cost of installing a new water heater varies, typically ranging from $800 to $1,900. This price can fluctuate based on the type of water heater (e.g., tankless, gas, electric), its capacity, brand, and the complexity of the installation. Factors influencing the cost include the need for any plumbing or electrical modifications, the heater’s energy efficiency, and local labor rates. High-efficiency models or tankless water heaters generally cost more upfront but can offer long-term savings in energy costs. Additional expenses may include removing the old unit and any necessary permits, depending on local regulations.


How Much Do Providence Plumbers Charge to Install a New Toilet?

Installing a new toilet in Providence, RI, typically costs between $260 and $620, with the average installation cost around $440. Several factors can influence this price, including the type of toilet being installed and the complexity of the installation process. For instance, high-end toilets with advanced features or those requiring significant plumbing modifications can drive the cost higher. Plumbers in Providence usually charge between $75 and $110 per hour, and these rates can be influenced by the plumber’s experience and the local economic conditions. Additionally, the overall cost may include the removal and disposal of the old toilet, which can add to the total expense. Homeowners should obtain detailed quotes to understand all potential costs involved in the installation process.


How Much Does it Cost to Have Bathtub or Shower Installed?

The cost to install a bathtub or shower varies significantly, typically ranging from $1,400 to $5,500, but it can be higher for premium models or custom installations. Factors influencing the cost include the type of unit (standard tub, jetted tub, walk-in shower, etc.), the complexity of installation, the need for plumbing adjustments, and the quality of materials. Labor costs, which can vary by region and contractor, also significantly impact the total price. Additional expenses may arise from removing an old unit, modifying existing structures, or customizing tile work and fixtures. High-end features like steam systems can further increase costs.


How Much Does it Cost to Have a Tankless Water Heater Installed?

The installation cost of a tankless water heater typically ranges between $1,000 and $3,000. This price varies based on the type of tankless system (gas or electric), the complexity of installation, and any necessary upgrades to gas lines, venting, or electrical systems. Gas models generally require more extensive installation work and are hence more expensive. The overall cost is also influenced by local labor rates and the specific requirements of the installation site. Tankless heaters, while more costly to install than traditional tank models, offer long-term savings in energy efficiency and space conservation.


Resources: Providence, RI – Wikipedia

Find A Providence Plumber Near You

Roto-Rooter Plumbing & Water Cleanup
1195 Broad St, Providence, RI 02905, United States

G.W.Wagner Plumbing,LLC
144 Freeborn Ave, East Providence, RI 02914, United States


Map Of Service Area: