How Much Does a Plumber Cost in Phoenix, AZ

In Phoenix, AZ, the cost of plumbing services varies based on the complexity and scope of the job, but homeowners can expect to pay an average hourly rate between $75 and $150. The typical range of costs per hour generally falls between $80 and $130, depending on factors such as the plumber’s experience, the time of service (e.g., emergency or after-hours calls can be more expensive), and the specific nature of the plumbing work required.

Buy Smarter - Spend Less Branded

Additional costs can accrue from parts and materials, which might range from $50 for minor parts like washers and valves to several hundred dollars for larger components like water heaters or pipe replacements. For a broader regional context, homeowners in the Phoenix metropolitan area, including surrounding suburbs, might encounter total costs ranging from $150 for simple repairs to over $1,500 for more extensive projects that involve significant labor, materials, and equipment. These estimates encapsulate a range of services from minor leak repairs to major installations or system overhauls, reflecting the diverse plumbing needs in this area.


Average Plumber Costs by Service Type in Phoenix, AZ

Below are a list of common plumbing services and the average cost to have a professional plumber in Phoenix, AZ to complete the job.

How Much Does Phoenix Plumbers Cost to Have a Plumber Install a Sink?

In Phoenix, AZ, the cost of having a plumber install a sink can vary significantly based on several factors, including the type of sink, the complexity of the installation, and the condition of the existing plumbing. The average hourly rate for plumbers in Phoenix ranges from $75 to $150, with most standard sink installations taking about 2 to 4 hours. For a standard installation, such as replacing an old sink with a new one of the same type, homeowners can expect to pay between $300 and $700, including labor and materials. More complex installations, such as adding a new sink where none existed before or installing a high-end or custom sink, can range from $700 to $2,000 or more, due to additional labor, the need for new plumbing connections, and higher material costs. Factors such as the type of sink, faucet, and any additional fixtures, as well as potential complications like rerouting pipes or addressing existing plumbing issues, can all influence the final price. Given these variables, it is crucial for homeowners to obtain multiple quotes from reputable plumbers to ensure a fair price and quality service. This not only helps in comparing costs but also in assessing the scope of work each plumber proposes, which can vary significantly.


How Much Does a Plumber Cost to Snake a Drain?

The cost of having a plumber snake a drain can vary, but on average, homeowners can expect to pay between $110 and $250. This cost depends on factors such as the severity of the clog, the location of the drain, and the length of time required to clear it. Additional factors like after-hours service or emergency calls can increase the price. Prices may also vary based on the plumber’s rates and geographic location. For more severe blockages or those located deep within the plumbing system, costs can be higher due to the increased complexity and time required for the job.


How Much Do Plumbers Charge to Fix a Pipe in Phoenix, AZ?

In Phoenix, AZ, homeowners can expect to spend an average of $150 to $500 on professional pipe repair services, although costs can range significantly based on various factors. The typical hourly rate for plumbers in the area falls between $75 and $150, and the total cost of a pipe repair job will depend on several key factors. These include the location of the pipe (e.g., easily accessible or behind walls), the extent of the damage (minor leaks versus major breaks), and the type of pipe material (PVC, copper, galvanized steel, etc.). Additional work, such as accessing hidden pipes or repairing water damage caused by a leak, can further increase the cost. For minor, accessible pipe repairs, costs might be on the lower end of the spectrum, while more complex jobs that involve significant labor, specialized tools, and materials could push the price toward the higher end. Parts and materials themselves can add $50 to $300 or more to the overall expense, depending on the necessary replacements and the quality of the components used. Given these variables, obtaining multiple quotes from licensed plumbers is recommended to ensure a fair price and comprehensive service.


How Much Does it Cost to Reroute Plumbing?

The cost to reroute plumbing varies widely, typically ranging from $700 to $1,500 or more, depending on several factors. The complexity of the project is a key determinant; this includes the length of pipes to be rerouted, the accessibility of the existing plumbing, and the type of materials used. Additional costs may arise if walls, floors, or ceilings need to be opened and later repaired. The cost can also vary based on the plumber’s rates, which are influenced by geographic location and their expertise. Larger projects, such as rerouting plumbing for a whole house, can significantly exceed these estimates.


How Much Does it Cost to Install a New Water Heater?

The cost of installing a new water heater varies, typically ranging from $800 to $1,900. This price can fluctuate based on the type of water heater (e.g., tankless, gas, electric), its capacity, brand, and the complexity of the installation. Factors influencing the cost include the need for any plumbing or electrical modifications, the heater’s energy efficiency, and local labor rates. High-efficiency models or tankless water heaters generally cost more upfront but can offer long-term savings in energy costs. Additional expenses may include removing the old unit and any necessary permits, depending on local regulations.


How Much Do Phoenix Plumbers Charge to Install a New Toilet?

In Phoenix, AZ, the cost of having a plumber install a new toilet typically ranges from $200 to $600, with the average cost falling around $400. Several factors influence this cost, including the type of toilet being installed (standard, high-efficiency, or luxury models), the complexity of the installation, and the plumber’s hourly rates, which generally range from $75 to $150. Basic installations, where the new toilet is a straightforward replacement for an old one, tend to be on the lower end of the price spectrum. However, high-end toilets with advanced features, such as bidets or smart technology, can significantly increase the cost, as can installations that require major plumbing modifications or adjustments to the existing layout. Labor costs are influenced by regional economic factors, such as the cost of living in Phoenix, and the plumber’s level of experience and expertise. Additionally, most plumbers include the removal and disposal of the old toilet in their installation fee, but it’s important to confirm this detail when obtaining quotes. Given these variables, homeowners should seek multiple quotes to ensure they receive a fair price and quality service for their toilet installation project.


How Much Does it Cost to Have Bathtub or Shower Installed?

The cost to install a bathtub or shower varies significantly, typically ranging from $1,400 to $5,500, but it can be higher for premium models or custom installations. Factors influencing the cost include the type of unit (standard tub, jetted tub, walk-in shower, etc.), the complexity of installation, the need for plumbing adjustments, and the quality of materials. Labor costs, which can vary by region and contractor, also significantly impact the total price. Additional expenses may arise from removing an old unit, modifying existing structures, or customizing tile work and fixtures. High-end features like steam systems can further increase costs.


How Much Does it Cost to Have a Tankless Water Heater Installed?

The installation cost of a tankless water heater typically ranges between $1,000 and $3,000. This price varies based on the type of tankless system (gas or electric), the complexity of installation, and any necessary upgrades to gas lines, venting, or electrical systems. Gas models generally require more extensive installation work and are hence more expensive. The overall cost is also influenced by local labor rates and the specific requirements of the installation site. Tankless heaters, while more costly to install than traditional tank models, offer long-term savings in energy efficiency and space conservation.


Resources: Phoenix, AZ – Wikipedia

Find A Phoenix Plumber Near You

Robins Plumbing, Inc
2802 N 37th Ave, Phoenix, AZ 85009

The Aussie Plumber
4600 E Shea Blvd Ste 203, Phoenix, AZ 85028

Pink Plumbing and Sewer
2375 E Camelback Rd #600, Phoenix, AZ 85016

Rooter Hero Plumbing & Air of Phoenix
5424 S 40th St, Phoenix, AZ 85040


Map Of Service Area: