How Much Does a Plumber Cost in Clarksville, TN

In Clarksville, TN, plumbing services come with an average hourly rate of approximately $75, with costs typically ranging from $60 to $90 per hour, including parts and materials. However, these rates can vary based on the complexity of the job and the plumber’s experience. Homeowners in the region should anticipate additional expenses for materials such as pipes, fittings, and fixtures, which can significantly impact the total cost. Overall, residents should budget between $150 to $500 or more for common plumbing tasks, considering labor, materials, and equipment, depending on the scale of the project.

Buy Smarter - Spend Less Branded


Average Plumber Costs by Service Type in Clarksville, TN

Below is a list of common plumbing services and the average cost to have a professional plumber in Clarksville, TN to complete the job.

How Much Does Clarksville Plumbers Cost to Have a Plumber Install a Sink?

When considering sink installations in Clarksville, TN, homeowners should be aware of the various factors influencing costs. On average, plumbers charge around $200 to $500 for standard sink installations, but this can increase for complex projects involving custom fixtures or modifications to plumbing systems. Hourly rates typically range from $50 to $100. To ensure a fair price, it’s advisable to obtain multiple quotes and thoroughly discuss project requirements with the plumber. Additional expenses may include sink materials, piping, and any necessary permits, contributing to a total cost estimate ranging from $300 to $1,000 or more, depending on the specifics of the installation.


How Much Does a Plumber Cost to Snake a Drain?

The cost of having a plumber snake a drain can vary, but on average, homeowners can expect to pay between $110 and $250. This cost depends on factors such as the severity of the clog, the location of the drain, and the length of time required to clear it. Additional factors like after-hours service or emergency calls can increase the price. Prices may also vary based on the plumber’s rates and geographic location. For more severe blockages or those located deep within the plumbing system, costs can be higher due to the increased complexity and time required for the job.


How Much Do Plumbers Charge to Fix a Pipe in Clarksville, TN?

Inquiring about the cost to fix a pipe in Clarksville, TN, homeowners can expect to spend anywhere from $150 to $1,000 or more, depending on the extent of the damage, the type of pipe material, and accessibility. Factors like the location of the pipe and the severity of the issue can significantly impact the final cost. On average, professional pipe repair services may charge around $75 to $150 per hour, with additional charges for parts and materials. Total costs can vary widely, ranging from minor repairs to more extensive pipe replacements, requiring homeowners to budget accordingly.


How Much Does it Cost to Reroute Plumbing?

The cost to reroute plumbing varies widely, typically ranging from $700 to $1,500 or more, depending on several factors. The complexity of the project is a key determinant; this includes the length of pipes to be rerouted, the accessibility of the existing plumbing, and the type of materials used. Additional costs may arise if walls, floors, or ceilings need to be opened and later repaired. The cost can also vary based on the plumber’s rates, which are influenced by geographic location and their expertise. Larger projects, such as rerouting plumbing for a whole house, can significantly exceed these estimates.


How Much Does it Cost to Install a New Water Heater?

The cost of installing a new water heater varies, typically ranging from $800 to $1,900. This price can fluctuate based on the type of water heater (e.g., tankless, gas, electric), its capacity, brand, and the complexity of the installation. Factors influencing the cost include the need for any plumbing or electrical modifications, the heater’s energy efficiency, and local labor rates. High-efficiency models or tankless water heaters generally cost more upfront but can offer long-term savings in energy costs. Additional expenses may include removing the old unit and any necessary permits, depending on local regulations.


How Much Do Clarksville Plumbers Charge to Install a New Toilet?

For residents in Clarksville, TN, seeking to install a new toilet, costs typically range from $200 to $800, including labor and materials. Factors influencing the price include the type of toilet selected, complexity of installation, and the plumber’s rates. High-end toilets and significant modifications to plumbing systems can drive costs higher. Additionally, labor expenses may vary based on regional economic factors and the plumber’s expertise. Homeowners should anticipate spending between $300 to $1,200 or more, accounting for the installation, materials, and potential removal and disposal of the old toilet. Obtaining multiple quotes and discussing project specifics with plumbers can help ensure an accurate cost estimate.


How Much Does it Cost to Have Bathtub or Shower Installed?

The cost to install a bathtub or shower varies significantly, typically ranging from $1,400 to $5,500, but it can be higher for premium models or custom installations. Factors influencing the cost include the type of unit (standard tub, jetted tub, walk-in shower, etc.), the complexity of installation, the need for plumbing adjustments, and the quality of materials. Labor costs, which can vary by region and contractor, also significantly impact the total price. Additional expenses may arise from removing an old unit, modifying existing structures, or customizing tile work and fixtures. High-end features like steam systems can further increase costs.


How Much Does it Cost to Have a Tankless Water Heater Installed?

The installation cost of a tankless water heater typically ranges between $1,000 and $3,000. This price varies based on the type of tankless system (gas or electric), the complexity of installation, and any necessary upgrades to gas lines, venting, or electrical systems. Gas models generally require more extensive installation work and are hence more expensive. The overall cost is also influenced by local labor rates and the specific requirements of the installation site. Tankless heaters, while more costly to install than traditional tank models, offer long-term savings in energy efficiency and space conservation.


Resources: Clarksville, TN – Wikipedia

Find A Clarksville Plumber Near You

Benjamin Franklin Plumbing of Clarksville
525 Alfred Thun Rd, Clarksville, TN 37040, United States

525 Alfred Thun Rd, Clarksville, TN 37040, United States
2968 B, E Old Ashland City Rd, Clarksville, TN 37043, United States

Clarksville Plumbing Pros
2511 Lock B Rd N, Clarksville, TN 37043, United States

Hiller Plumbing, Heating, Cooling & Electrical
1500 Ashland City Rd, Clarksville, TN 37040, United States


Map Of Service Area: